QM SL70
1.8 - 3 ton
70 cm hydraulic mulcher applicable to excavators with weight 1.8-2.5 ton, suitable for drainage working on grass, bushes, brooms, up to a diameter of 4cm.
The faceplates are adjustable and open fully, to allow higher cutting capacity. It allows a faster cutting thanks to the excavator rotation
Features
-
Direct transmission.
-
Internally reinforced with double metal sheet.
-
Internal cutter bars
-
Protective cover for motor.
-
4 Line rotor with tempered blade M1F.
-
Inside rotor supports with ”labyrinth” for protection of bearings from debris.
-
Double row spherical adjustable bearings of 1st quality.
-
Valves block complete with priority valve for adjusting oil flow, anti-shock valve (pressure relief valve), anti-cavitation.
-
Gear motor.
-
Accident prevention rubber protections according to EC directives
-
Front chains debris guard
-
No case drain required
• Carrier range : excavators 2 - 4 ton
-
Transmission : direct drive
-
Body : internally reinforced double-case with interspace
-
Height control : feeler roller 3-position adjustment
-
Rotor : helical; interchangeable hammers or blades
-
Valve block : priority flow control; anti-shock; anti-cavitation
-
Bearings : double-row spherical; first quality
-
Applications : brush; grass; light scrub cutting
-
Swinging hammer flails as standard
A high quality Italian built flail with 90cm cutting length for 2T - 4.0T excavators . Suitable for drainage working, land clearance and light duty mulching.
Qm SL90
2 - 4 ton
QM SM110
4-6 ton
-
• Carrier range : excavators 4.0-6.0 ton
-
• Cutting width : 110 cm
-
• Transmission : direct drive
-
• Rotor : helical; austempered hammers or blades
-
• Valve block : priority flow control; anti-shock; anti-cavitation
-
• Direct Drive Motor
-
• Height control : feeler roller 3-position
-
• Typical flow : ≈45/70 l/min
A high quality Italian built flail with 110cm cutting length for 4.0 - 6.0 ton excavators. suitable for drainage working, land clearance and light duty mulching.
Hammer flails that cut up to 8cm diameter branches.
-
• Carrier range : excavators 6.0-10.0 ton
-
• Cutting width 110 cm
-
• Transmission : Triple belt
-
• Motor options : cast iron gear motor or piston pump
-
• Hydraulic flow range : 60-100 l/min
-
• Pressure range : 200-250 bar
-
• Rotor : helical; hammers or blades
-
• Valve block : priority flow control; anti-shock; anti-cavitation
-
110cm hydraulic mulcher for 6.0-10.0 ton excavators. Suitable for drainage working on grass, bushes, brooms, wood, up to a diameter of 12 cm.
Qm SR110
6 - 10 ton
QM FM- Series
6-18 ton
-
• Carrier range : excavators 6.0-18.0 ton
-
• Rotor type : reversible layout; helical with hammers or blades
-
• Transmission : Triple belt
-
• Valve block : priority valve; anti-shock; anti-cavitation
-
• Height control : 3-position roller
-
• Use cases : heavy verge; scrub; roadside maintenance
-
A high quality Italian built flail with 70-130cm cutting length for excavators from 6.0T - 18T. Suitable for drainage working, land clearance and light duty mulching.
-
Available with hammer flails that cut up to 15cm and Carbide CP tips that cut up to 22cm diameter branches or Carbide TP tips that cut up to 25cm. The unit utilizes a 3 belt drive system for high transmission of power from the motor to the rotor.
-
Many options available on this model, such as hydraulic opening door, different rotors/blades - check out the data sheet for more information
The model FR flail header is applicable to excavators from 10 to 30 tons. Designed for major uses such as deep clearing of wooded areas and shredding of large logs.
A sturdy shell made of premium material ensures stability and resistance to heavy impact and yielding. The possibility to configure the shaft with three different types of rotors guarantees solutions and excellent working performance on various terrains.
-
A high quality Italian built flail with up to 160cm cutting length 10.0 - 30.0 ton excavators.
-
Serious heavy duty Mulching head !
QM FR Series
10 - 30 ton
